Categories
Atomizers
Mods
Misc
Search

Category:

Company:

Dripbox 60w kit

Last Updated: 04 Mar 2016

Height:82mm
Width:39mm
Depth:22mm
Capacity:7ml
Batteries:Requires 1 x 18650 Battery
Wattage:60W
Resistance:0.2ohm Pre-made coils

Submitted by thevapedb

Compare prices with VapeAssist

The brand new KangerTech Dripbox has arrived. The vaping community asked for it and Kanger delivered. The DRIPBOX is a combination of the Subdrip and the Dripmod. The Dripmod is similar in size to the KBOX Mini, but it has a hollowed out slot for a 7.0ml squeezable tank. With this setup you will never have to “drip and drive” again! Were you looking for the vapor and flavor production that an RDA produces but don’t want to build your own coils or drip your e-liquid? The Dripbox has your name written all over it.

KangerTech Dripmod

The KangerTech Dripmod is a 60 watt sub ohm mod that can fire down to 0.2ohms. This revolutionary device has a 7ml e-liquid squeezable e-liquid tube built inside. The 7.0ml e-liquid tube feeds directly up the Kanger Subdrip and saturates your cotton, so you will not have to keep dripping e-liquid on your RDA. The Dripmod utilizes a single 18650 battery that can be easily replaced by removing the battery cover. There is also a  micro USB port that will allow you to charge your mod without replacing the battery.

KangerTech Subdrip

The KangerTech Subdrip is Kanger’s first attempt at an RDA. This sleek RDA features two airflow slots located near the top of the mod. When you squeeze the e-liquid tube style tank inside of the dripmod, the e-liquid will be ushed up into the subdrip and it will completely eliminate the need to “drip” your e-liquid every time the coil is dry. If you do not want build your own coils, Kanger is also making pre-built coils for the Subdrip, and they will be priced the same as their OCC coils. This RDA also has adjustable airflow holes that are 13mm in diameter. The chuff cap on this RDA is removable, so you can use your favorite chuff cap, or you can use the high quality chuff cap that is included in this kit.

Product Features:
  • 60W Continuous Output
    • 0.2 ohm Minimum Atomizer Resistance
    • 3.7V Output
  • 7ml Capacity
    • Feeds from Bottle
    • 'Squonk' Action
      • Press to Feed into RDA Deck
      • Easy and Convenient
    • Dripper Experience with Tank Capacity
  • Dripbox Height – 82mm, Width – 39mm, Depth – 22mm
  • SUBDRIP RDA
    • Width – 22mm, Height 26mm
    • Swappable Build Decks
      • Prebuilt 0.2 ohm Coils
      • User Made Coil Capability
    • Two Post Design
      • 1.5mm Terminal
    • Dual Adjustable Airflow
      • 10mm by 1.5mm Airslots
    • 12mm Widebore Delrin Drip Tip
  • Bottom Threaded Battery Access Port
    • One High Amperage 18650 Battery (sold separately)
  • Gold Plated Spring Loaded 510
  • Micro USB Charge Port
    • 1A Charging Port
    • Battery Charge Indicator
  • Low Battery/Short Circuit/Reverse Polarity/Overtime Protection

Product Includes:
  • One Kanger DRIPBOX 60W Squonk Kit
  • Extra 7ml Squonk Bottle
  • Two Prebuilt 0.2 ohm SUBDRIP Build Decks
    • One Preinstalled
  • One Japanese Organic Cotton Pad
  • One Micro USB Charging Cable
  • One User Manual

 

Related Products

DPRO RDA

by CoilArt   
Height:82mm
Width:39mm
Depth:22mm
Capacity:7ml
Batteries:Requires 1 x 18650 Battery
Resistance:0.2ohm Pre-made coils
Connection:510
Airholes:13mm Air Intakes
# of Posts:2
Power Range:Max 60W
Wattage:60W
Charge Port:Yes
# Required Batteries:1
Battery Type:18650
Coils Rebuildable?:Yes
VapeMateNZ - September 18, 2016, 6:38 pm

The KangerTech Dripbox is a bottom fed “drip” vape that really works. This unit, rather than dripping the eliquid onto the coils, uses a “squonk” (squeezable to the rest of us) bottle that feeds the Rebuildable Dripping Atomizer. The eliquid is held in a plastic bottle inside the mod where a cutout in the side allows pressing of the bottle, forcing the eliquid up into the RDA to saturate the cotton and coils. Sweet! The Dripbox comes with everything a vaper needs- the battery mod, two “squonk” eliquid bottles (7ml), a bottom fed rebuildable dripping atomizer (also just plain re-wickable as well), a spare pre-build deck, plus a parts goodie bag with extra post screws, two coils and the ever present KangerTech mini blue screwdriver. We here at Vape Mate NZ have been field testing this unit all week and it is great. Crank the air flow way down this thing hits hard. If you're hanging out with your vaping friends and want to try a bit of their eliquid flavor you can pull the top off and drop it right on the coils and have a taste test. The eluquid bottles are easy and quick to remove and refill. What we really love about the Dripbox is the simplicity of operation, while still being rebuildable for cotton freshness and longevity, there’s only one button and no temp to mess about with, you just press and go. It’s small, fits well in your hand and doesn’t have any breakable glass parts plus the price point is very reasonable. Try it and you won’t regret it, the Dripbox is fucking sweet.

Name:
Email:
Website:
Rating:
Review: